Evotec at FABTECH and EuroBLECH 2026: Two Shows, One Week
This week Evotec is exhibiting on two continents at once: at FABTECH 2026 in Las Vegas and at EuroBLECH 2026 in Hanover, Germany. Both shows run through Friday, October 23. Here is what the first days have looked like, and how to find us before the halls close.
Key Takeaways
Two shows, two continents, one week
FABTECH is North America's largest event for metal forming, fabricating, welding, and finishing. EuroBLECH is the international sheet metal working exhibition held every two years in Hanover. This year both fall in the same week, so our team is on the floor in Las Vegas and Hanover at the same time, talking to fabricators about the same problem: getting cut parts ready for the next process without manual grinding.
Evotec was founded in 2014 and focuses on one thing: metal finishing. Our deburring machines remove burrs, slag, and oxide, round edges, and finish surfaces across the SurfeX, EdgeX, SlagMaster, and FabGo lines. Our FlatLine hydraulic precision roller levelers flatten sheet and plate. Behind us stands an industrial group with more than 40 years in heavy steel fabrication. More about Evotec.
What we have seen on the stand so far
In Las Vegas, visitors have not just walked past. They have opened the machine doors to look at the internal build, asked about the conveyor and workpiece retention, and run sample parts on the stand. Some of those conversations have already turned into orders, in Las Vegas and in Hanover.
A typical request: cut parts must leave the shop with no burrs on the edges and no rust or dirt on the surface, ready for coating, welding, and assembly. That is the work the SurfeX SRS on our FABTECH stand is built for. A front drum head handles deburring and deslagging, offset rotary brushes round the edges, and a second drum head lays down a uniform line-grain finish, all in one pass.
One visitor told us the machine's design caught their eye before the spec sheet did. That was deliberate, and it is good to hear.
In Hanover, with our dealer partners
At EuroBLECH, dealer partners from across Europe, including Sweden and Germany, are working the show with us and meeting their own customers. For a fabricator buying a finishing machine, that matters: the people you meet at the show are the people who install and service the machine afterwards. Evotec machines are running on fabrication floors across Europe, supported by 17 dealers and 26+ service points, a network we keep growing so fabricators get support close to their shop.
What stands behind every machine
- A 3-year warranty: three years where the industry norm is one, now offered worldwide. See what it covers.
- Certified production: ISO 9001 quality management and CE conformity.
- Built in our own factories. Supported close to yours: A growing global network of dealers and service partners who deliver, install, and maintain Evotec machines, so help is never far from your shop floor.
Visit us before October 23
FABTECH 2026: Las Vegas Convention Center, Central Hall, booth C8148. Open through Friday, October 23. Event details.
EuroBLECH 2026: Hanover Exhibition Grounds, Hall 14, Stand H64. Open through Friday, October 23; the last day closes at 17:00. Event details.
If you are coming, bring a drawing or a sample part. Seeing what a machine does with your own part answers most questions faster than a brochure.
FAQs
Q1: Where can I find Evotec at FABTECH 2026?
Evotec is in the Central Hall of the Las Vegas Convention Center, booth C8148. FABTECH 2026 runs from October 21 to October 23, 2026.
Q2: Where can I find Evotec at EuroBLECH 2026?
Evotec is in Hall 14, Stand H64, at the Hanover Exhibition Grounds in Germany. EuroBLECH 2026 runs from October 20 to October 23, 2026, and closes at 17:00 on the last day.
Q3: What does Evotec make?
Evotec, founded in 2014, builds machines for metal finishing: deburring, edge rounding, slag and oxide removal, and surface finishing (SurfeX, EdgeX, SlagMaster, FabGo, and the hand-guided MultiFlex). It also builds FlatLine hydraulic precision roller levelers and automation add-ons such as VSORT, Flipper, and Hydro Dust 2.0.
Q4: Can I test my own parts before buying?
Yes. Bring a drawing or a sample part to either booth. After the shows, send your drawings or samples through our contact page and we will run a test on your parts.
Q5: Who sells and services Evotec machines?
Evotec machines are delivered, installed, and maintained by a global network of dealers and service partners. The network keeps growing, so support stays close to every customer. Every machine is built in Evotec’s own factories.
Q6: What warranty does Evotec offer?
Evotec finishing machines carry a 3-year warranty on the machine structure and non-motorized components, where one year is the industry norm. Motorized components are covered for one year, and abrasives and other wear parts are excluded.
Next Steps
Can't make it to Las Vegas or Hanover? Compare our deburring machines by part size, material, and the finish you need downstream.
Or send us your part drawings or samples, and we will run a test on your parts and show you the result.
